Page 148 - Amsco 2023 Catalog

ArchitecturAl hArdwAre

SASH CORDS & ACCESSORIES SASH COUNTERWEIGHTS
Our pre-stretched, Our 96 series stackable cast iron
premium waxed cotton counterweights are designed to
sash cord has an inner economically facilitate the balancing
synthetic-stranded cord of sash in weight and pulley windows.
for increased strength The 1/2" through-hole permits their
and flexibility. The outer Grabba is an essential piece of kit use with either rope or chain.
covering of plaited waxed and in the joiners' armory. The square and radius cross-section
polished premium grade cotton is ! One man operation provides more weight per inch than
designed specifically for use with ! No need for hammer or nails conventional round weights, essential
pulley systems and will give many ! Simple sash cord adjustment when dealing with heavier glazing or
Part # Length years of smooth and trouble-free ! Faster fitting time insulating glass. The 1 lb., 3 lbs.,
96-802 65' Roll performance. ! Neat appearance and 5 lbs. sizes permit flexibility
96-803 164' Roll Part # Size Load Length On bigger windows, where a sash and precision in attaining a proper
96-804 328' Roll 96-704 #8 (1/4") 100 lbs. 100' weight is over 22 lbs, there will still Part # Weight Height balance. They are suitable for
Load Limit 220 lbs. 96-705 #10 (5/16") 200 lbs. 100' be a need to pin the cord. 96-700-5 5 lbs. 7-7/8" 1-3/4" or larger sash in either new
5-1/8"
3 lbs.
96-700-3
1/4" Nylon Cord 96-809 96-700-1 1 lb. 2-3/8" construction or retrofit.
MIGHTON 96-710 #4 (1/8") 20 lbs. 600' Black Plastic
ACCESSORIES SPRING BOLTS MISCELLANEOUS

Part # Finish 19-317 19-318
19-321 Solid Brass The Model 19-317 is a surface The Model 19-318 is a solid brass 39-572 39-573
Oil Rubbed mounted window spring bolt window spring bolt designed for 19-320
19-321ORBZ designed for holding a vertical or installation in the wood stile of a The Model 39-572 pole hook
Bronze and Model 39-573 pole hook The Model 19-320 transom chain
horizontal sliding sash in either
vertically sliding sash. This type
Stop Bead Adjuster an open or closed position. The of hardware is commonly used in socket are intended to facilitate is designed to limit the opening
A solid brass stop bead adjuster spring plunger may be locked pairs on light weight, single hung the operation of large or inac- of transom sash or other bottom
for mounting removable window into its fully retracted position by sash in lieu of a balance system cessible double-hung windows. hinged windows. The chain
stops. The slotted screw hole a simple rotation of the spherical or sash lock, and is designed to The pole hook is designed to be brackets are solid, polished and
permits 1/8" of lateral adjustment. knob. The window spring bolt is be press-fit into a 3/8" diameter mounted on the end of a wooden lacquered brass. The 12" chain
They are supplied in boxes of 50 especially suited for retrofitting hole bored through the sash operating pole of an appropriate is solid bronze.
pieces with accompanying to older windows lacking balance stile. A hole to accept the spring length. The 39-573 pole socket is Base Dimensions:
#8 x 1" wood screws. easily mounted in the sash rail, 1-3/16" x 1" x 11/16"
systems or to any sash requiring plunger is then bored in the win-
a multi-position lock. The Model dow jamb to hold the sash at any requiring only the boring of a 1"
19-317 is precision extruded and desired height. The Model 19-318 diameter hole. Both items are
machined from solid brass and is precision turned solid brass solid cast brass with a polished
hand polished. Three strike plates with a stainless steel spring. and lacquered finish.
are furnished with each lock. Housing Dimensions:1-7/8" x 3/8" Model 39-572 Dimensions:
Base Dimensions: 1-1/8" x 1-1/4" Overall Length: 3-3/8" 4"L x 7/8" I.D.
Strike Dimensions: 5/8" x 1-7/16" Model 39-573 Dimensions:
1-1/4" x 2-1/4"
VENT LOCKS

Key Operated Vent Lock The new innovative VENTLOCK acts as a major deterrent to snatch
thieves who spot what they consider is an easily opened window.
Fitting is simple, just screw/insert it into the appropriate diameter drill
VENT LOCK
hole. The special key which is supplied as part of the VENTLOCK
system releases an inner barrel which prevents the window from
being moved. The barrel revolves freely preventing it from being
cut. The VENTLOCK is competitively priced against existing window
Locked locks. Each VENTLOCK includes a steel operation key and a brass
Position strike plate for mounting on the lower sash check rail.
Part # Finish
50-446 Solid Brass
KEY 50-446CH Chrome
Vent Lock with Key and Strike
MIGHTON
STRIKE PLATE Open Position Shown
146
© 2023 PGI.