Page 311 - Amsco 2023 Catalog

WindoW/door GlazinG & WeatherstrippinG

SKIRTING WEATHERSEAL GLAZING CLIP

Part # A Finish
900-17451 .430 Gray 63-453 90-572 90-573 900-5371
900-17452 .530 Gray Gray. Sold in 100' Spools White Plastic White Plastic Plastic
900-17453 .630 Gray "Double" "Single" ALSCO ANACONDA
ADHESIVE FOAM WEATHERSTRIPPING TAPE

Part # Size Material Color
63-151 3/8" Wide x 3/16" High x 17' Vinyl, Closed Cell Gray
63-152 1/2" Wide x 3/8" High x 10' Vinyl, Closed Cell Gray

FOAM CORNER SEALS
Q-Lon® Door Seal made of open-cell urethane foam core and clad in embossed polyethylene. Strike jamb and hinge jamb sill corners.
One profile seals the strike side, hinge side and header while maintaining a tight seal.

Part # Color
63-296U-2 Bronze
63-192BGU-2 Beige, 2" Lengths 2" Lengths
63-192WU-2 White, 2" Lengths
63-192U-2 Bronze, 2" Lengths

MAGNETIC WEATHERSTRIP REPLACEMENT FOR E.Z.D. GLAZING TOOL
STEEL DOORS Part # Description
59-79 E.Z.D. Glazing Tool
Metal door replacement set consists of 59-79G Hand Guard Replacement
magnetic and compression pieces which 59-79X Blade Replacement
fit into existing kerf around the door
frame. Seals completely against drafts,
dirt and moisture. 1. The Tool was designed to assist in the Deglazing of Glass from Residential Vinyl
Windows. The most common glazing systems include foam tape, silicone, and
butyl tape. It was not designed for some of the newer glazing compounds which
Packed 6 Per Carton are extremely hard and strong. It is not recommended for the deglazing of
Set consists of: commercial units.
1 pc. - 6' 8" Magnetic Weatherstrip 2. The Blade is designed to lay flat on the surface of the glass and slide into the
1 pc. - 3' Magnetic Weatherstrip glazing pocket. Tests have shown that a small amount of soapy water will facilitate
1 pc. - 6' 8" Compression Weatherstrip this action. Once the tool is inserted into the glazing pocket, the wheel will roll
through the glazing material much the same as a pizza cutter rolls through a pizza.
3. After the entire perimeter of the unit has been cut, the glass may be removed by
applying gentle pressure to each corner with a putty knife or similar instrument.
Part # Color Do not use the tool in the corner because the torque applied will shorten the life of
900-9000S White the tool substantially and may result in injury to the user.
900-9000SBG Beige
900-9000SBZ Bronze Note: While the hand guard does provide some measure of protection from broken
glass it is recommended the user always wear safety glasses and gloves when using
the tool. The tool should be stored in its plastic bag when not in use.

309
© 2023 PGI.