Page 98 - Amsco 2023 Catalog

SaSh Support SyStemS

83-P SERIES BALANCE
3/8" Tilt Tube Balance

Two 1/4" Pins
Ordering Information General Information
1. Measure plastic tube length. 1. The bearing (or Pawl) colors used on the 83P Series balance are white
2. Identify bearing color by looking down into the tube where the rod for sash weighing up to 18 lbs., and yellow for sash weighing 18 to 30 lbs.
comes out. Refer to general information #1. If your sash weighs between 18 and 30lbs, add HD after the part number.
3. Select the part number from the chart below for (2) 1/4" pin configuration. Example: If ordering a 36" balance for a 23 lb. sash, your part number
4. If different configuration, select appropriate pin configuration from is 83-P36HD.
the chart and add the number to the end of the part number. 2. Standard tube color is gray. If ordering white, place the letter "W" at the
end of the part number. If ordering black, place the letter "B" at the end
Example Ordering Chart of the part number.
Complete Part
Balance Length Tube Color Pin Configuration 3. Appropriate tensioning tools are 85-511 and 85-515 as shown
Number on pages 113 and 121.
26" White - 83-P26W
4. Accessories must be ordered separately.
19" Black 2 83-P19B-2

Tube Length Tube Color Part Number
15" Gray 83-P15
16" Gray 83-P16 Balance Pin Options
17" Gray 83-P17
18" Gray 83-P18
19" Gray 83-P19
20" Gray 83-P20 -1
21" Gray 83-P21
22" Gray 83-P22 One 3/4" Pin
23" Gray 83-P23
24" Gray 83-P24
25" Gray 83-P25 -2
26" Gray 83-P26 Two 3/4" Pins
27" Gray 83-P27
28" Gray 83-P28
29" Gray 83-P29 -3
30" Gray 83-P30 One 1/2" Pin
31" Gray 83-P31
32" Gray 83-P32
33" Gray 83-P33
34" Gray 83-P34 -4
35" Gray 83-P35 Two 1/2" Pins
36" Gray 83-P36
37" Gray 83-P37
38" Gray 83-P38 -5
39" Gray 83-P39 One 1/4" Pin
40" Gray 83-P40
41" Gray 83-P41
42" Gray 83-P42
43" Gray 83-P43
44" Gray 83-P44
45" Gray 83-P45

*Other sizes available upon request.
96
© 2023 PGI.